XLNT-3000 3000W Fiber Laser Cutter Chiller

Home
products
Fiber Laser Chiller
XLNT-3000 3000W Fiber Laser Cutter Chiller

XLNT-3000 3000W Fiber Laser Cutter Chiller

XLNT-3000 3000W Fiber laser cutter chiller is suitable for 3000W fiber laser cutter. XLNT-3000 adopts intelligent dual-temperature dual-control mode, which can cool the fiber laser generator and QBH connector at the same time. It has an ultra-high temperature control accuracy of ±0.3°C. It is also equipped with professional water filtration and purification equipment, which truly realizes a machine with multiple uses, environmental protection and energy-saving.

Advantage

1，The cooling capacity is 8500W.
2，It is equipped with protection functions such as flow alarm, high-temperature water alarm and low-temperature water alarm.
3，The industrial water cooled chillers are equipped with a deionizing filter to ensure the cleanliness of the laser cooling water circuit.
4，There are multiple fault detections inside to protect the laser in a normal state, and a signal output port is also equipped.

Specification

Voltage	220v
Frequency	50hz	60hz
Current	4A-17.3A
Compressor power	2.34KW	2.3KW
	3.1HP	3.1HP
Cooling capacity	24566Btu/h	23884Btu/h
	8.5kw	8.0kw
	6192kcal/h	6020kcal/h
Electric assisted power	400W+1800W
Refrigerant	R-22/R410A
Precision	±0.5℃
Reducer	Capillary
Protection	Over-current protection for compressor, flow alarm, over-temperature alarm
Pump power	0.75kw
Tank capacity	40L
Inlet and outlet	Rp1/2” + Rp1”
Max.lift	53M
Max.flow	70L/MIN
N.W	95KGS
G.W	113KGS
Product dimension	784789CM(LWH)
Packing dimension	8760109CM(LWH)